Skip to main content
  1. Home
  2. Grooming

How to shave with a straight razor without hurting yourself

By and
Straight razor shave
Image used with permission by copyright holder

Learning how to shave with a straight razor is a delicate art form of its own that requires practice and patience in learning how to master it. It’s a ritual that can become a meditative discipline for those who hone its craft, almost transporting you back in time — a suave experience. But don’t just take our advice on it. Look no further than the epitome of sophistication — 007 himself.

When Moneypenny helps James Bond finish shaving with a straight razor in the 2012 classic Skyfall, she says — knowingly — that “Sometimes, the old ways are the best.” It’s an adage to live by and one that holds true when it comes to men’s grooming routines.

Recommended Videos

If you have the time and resources to invest in a super close shave, why not switch from a regular razor to a straight razor? There’s something about an open razor, mixed with a dash of nostalgia, that adds to the allure of what is possibly the closest shave you’ll ever achieve. No doubt that’s why many professional barbers wield the straight razor as their weapon of choice. 

Related

“We don’t often recommend men shave with a straight razor as the learning curve is steep and the possibilities for user error (nicks and cuts and even worse) are much greater than with using a cartridge or even a double-edge safety razor,” said Michael Gilman, founder of the Grooming Lounge. However, the advantages of a straight razor shave, Gilman noted, are many. Here’s our comprehensive guide to straight razor shaving:

Prepping your face

You can’t just grab a straight razor and start slicing hairs off. That’s a recipe for disaster. Instead, follow this simple routine to get your face ready for the straight razor:

  1. Much like any shaving procedure, you have to start with the basics. Start with a clean, washed face. You even can prep after washing by applying a hot towel (just microwave a wet one for 30 seconds) and resting a few minutes while the heat and steam do their work of softening facial hair and follicles.
  2. Follow that with a pre-shave oil to lube up your whiskers and skin.
  3. Apply shaving cream in whatever manner you see fit, though we suggest using a badger hair brush to really work it in and lift the hair away from the skin to allow for a closer shave once you touch razor to skin.
  4. Use the directions in the above section to load a new razor blade into your shavette.

Primed and ready, let’s finally begin shaving.

Shave brush and soap on a wooden table.
Image used with permission by copyright holder

How to shave with a straight razor

After you’ve followed all the steps above, you’re finally ready to put that blade to your face. Follow these steps, and you’ll wind up with the closest shave you’ve ever experienced at home.

  1. Place the straight razor in your hand with this basic grip: index, middle, and ring finger on the top of the blade with the thumb in the center at the back and your pinky resting on the blade’s handle/tang. More important than whatever grip you choose, however, is dexterity and comfort. If this method doesn’t feel comfortable to you and leaves you feeling shaky, feel free to switch it up.
  2. Begin shaving by starting with the right side of your face where your sideburns meet your hairline. Hold the razor at an angle almost parallel to your skin, and with your opposite hand, pull the skin away from the blade and keep it taut.
  3. Shave downward with the grain using small, smooth strokes. Rinse away excess hair after every stroke.
  4. Continue in that manner for your right cheek, and then proceed down and over your jawline to your neck.
  5. Be extra careful when shaving your neck — the skin in that area is extremely thin and most prone to nicks and cuts.
  6. Repeat the above steps with the left side of your face.
  7. Once both sides of your face are finished, proceed to your upper lip and, using your opposite hand to pull the skin downward and as taut as possible, shave downward from the nose with small, quick strokes.
  8. Next is the chin, so this time, pull your lower lip up as far as possible and again shave downward from the lip to your chin and down your neck.
  9. Give yourself a rinse and a wipe down, and follow up with aftershave and one of the best face moisturizers, and you’re all set for the day.

What is a shavette and how do you load one?

While some straight razors are a true blade, just like your favorite kitchen knife, others feature an easily changeable razor blade — used in a “shavette” — for minimal maintenance.

Murdock London offers the following step-by-step directions for loading a disposable blade:

  1. Lift the metal catch at the end of the razor and separate the two metal sections.
  2. Set the fresh blade with the edges facing to and away from you. Hold it from underneath with both thumbs and middle fingers in the middle.
  3. Bend the edges upwards until they snap clean in half.
  4. Fit a half-blade over the two raised bumps on the lower metal section and then place the higher metal section on top and squeeze together.
  5. Close the catch over the two metal sections. Your straight razor is now ready for use.

Why you should use a straight razor

While using a straight razor is difficult, it can still be a task and skill worth learning. Here are just a few reasons why you should strongly consider the straight-razored shave:

Precision

Straight razors offer more precise, controlled shaves compared to traditional safety razors. Triple-bladed safety razors and electric razors both have a ton of contact points with the face. As a result, the final product is hard to control. The single cutting edge of the straight razor gives you the opportunity to focus and define your shave from a single line.

Facial health

While an aftershave balm is a excellent way to reduce irritation from any shave — including one from a straight razor — a proper shave with a straight razor could also reduce your risk of getting ingrown hairs, nicks, and a nasty infection.

Saving money and environment

You will spend less money on supplies for your straight razor since you’re not buying expensive cartridges again and again. Instead, the main skill for straight razor maintenance is learning how to sharpen the blade. Similarly, straight razors are more environmentally friendly — fewer disposable items mean less pollution and resource consumption.

Man getting a straight razor shave from a barber.
Image used with permission by copyright holder

How hard is it to shave with a straight razor?

When learning new grooming routines or habits, it will take time, practice, and trial and error to fully amass enough experience to feel comfortable in doing so. This is imperatively true with learning how to shave with a straight razor. Take your time, and your neck will thank you later.

Editors’ Recommendations

Topics
John Jones
John Jones
Contributor
John Jones is a Jersey City, New Jersey-based writer who enjoys covering design in all its forms, from fashion to…
How to exfoliate your face the right way (according to your skin type)
Exactly how to exfoliate your face, according to your skin type
Facial cloths on a wooden ring dish

Fun fact: Humans shed. While you may think, "Yuck," this process serves a distinct purpose: It removes dead skin cells to make room for new ones. The result? Brighter, clearer skin. Skin cell turnover helps keep your face from looking dull and tired. The process can also reduce the chances of acne and breakouts.

While the skin naturally turns over, your face may need some assistance through exfoliation. Experts generally recommend exfoliating as part of your regular skincare routine (though not necessarily daily). You'll find tons of exfoliating products in the skincare aisle and tons more DIY recipes out there. How to exfoliate the face depends on your skin type. Here's what to know.
What is exfoliating?

Read more
Dull skin? Here’s how to liven it up
Banish dull skin once and for all with these tips and insights
a bunch of serums in a row

You wake up, look in the mirror, and find yourself doing a double-take—and not for good reasons. You may notice your skin looks rather blah and even gray — isn't hair what goes gray? While all the talk of achieving "radiant skin" often targets women, men may also want a glow, not merely during the summer months. However, dull skin may be standing in the way.

Having dull skin can also be about more than looking your best (though there's no shame if that's your primary pain point). Sometimes, dull skin includes side effects like patchiness, increased sensitivity, itchiness, and flakes. None of these symptoms will make you feel your best, either.

Read more
How to get rid of those annoying blackheads once and for all
Follow this guide to say bye-bye to blackheads and the steps to keep them from coming back
Man using nose strip

Since many of us are on video conference calls or even video calls with family, there's nothing worse than seeing a blackhead standing sentinel on the plain of your well-groomed face. No matter how good the rest of you looks, the knowledge of that unsightly blemish will ruin your feelings every time you confront your reflection for the rest of the day.

Blackheads happen when excess oil from your skin (known as sebum) and dead skin cells collect in your skin’s pores, the tiny holes that allow your skin to "breathe." Blackheads result from clogged pores with open surfaces, allowing for dark-colored oxidation that gives the blemish its name.

Read more